2009

Table Of Contents
3. Icons that appear overlapped in the main view can be hidden if the Hide Colliding Icons check box
is selected.
4. Enter the distance in the Cull Radius box for how close hyperlinks have to be in order to be drawn in
the main view. Any hyperlinks further away than this distance will not be drawn. The default value of
0 means that all hyperlinks will be drawn.
5. Select the In 3D check box if you want to draw the hyperlinks icons in 3D in the main view. They then
float in 3D space just in front of their attachment points to the items. If this box is unchecked, then all
hyperlink icons are drawn in 2D over the top of the all geometry.
Note:
In 3D mode hyperlinks can become hidden by other objects in the scene when you are
navigating.
6. Enter the maximum number of icons to draw in the main view in the Max Icons box.
7. Hyperlinks can be drawn with leader lines (arrows) pointing to the attachment point on the item that
the hyperlink is attached to. Enter the X- and Y- distance in Leader Offset for the number of pixels to
the right and up that these leader lines will use.
8. Click OK to set the options or Cancel to exit the dialog without setting them.
Configuring standard hyperlinks categories:
Reviewing
251