2009

Redlining
Redlining allows you to add annotation directly over a viewpoint. It is mutually exclusive to the navigation
modes so that when you are redlining, you cannot navigate and vice versa.
You can also associate redlining with saved viewpoints in the Clash Detective results.
The redline tools, which can all be accessed from the Redline Tools control bar or from the Review >
Redline menu, are:
Text - adds text over a viewpoint.
Tag - adds a tag over a viewpoint.
Freehand - enables you to sketch over a viewpoint.
Line - draws a single line over a viewpoint.
Line String - draws a string of lines over a viewpoint.
Ellipse - draws an ellipse over a viewpoint.
Cloud - draws a cloud over a viewpoint
Erase - erases the selected redline.
Adding Redlines
The Redline Tools control bar is a dockable bar like all others in NavisWorks. It can be accessed by
clicking on the Workspace toolbar or by clicking Tools > Redline.
Note:
Redlines can only be added to a saved viewpoint or to a clash result which has a saved
viewpoint. If a viewpoint is not selected, a warning is given if a redline tool is selected.
Reviewing
233