2009

Select 2 in the drop-down list on the the Sectioning toolbar.
Repeat the steps for creating the bottom section plane, but this time, click to align
the section plane with top of model.
Note:
The model may disappear completely at this stage. If this happens, move the slider bar until it
becomes apparent where the plane is.
3. If necessary, keep switching between planes 1 and 2 using the drop-down box, and configure the
planes' position to how far you want them separated in the slice.
4. When happy with their separation, select section plane 2 and click the Link button. This links
planes 2 and 1 together to form a slice.
5. Use the slider bar to move the horizontal slice through the model.
6. If you want, you can save this slice configuration into a viewpoint. See “ Saving Viewpoints ” for more
information on how to do this.
Thinking about linked sections and slices can be confusing. Just remember that when linking sections
together, the section plane direction currently in operation effectively moves the whole "box" around the
scene, keeping the other section planes relative to it.
Sectioning
221