2009

Leica Scan File Reader Options
Setting the Leica Scan file reader options:
1. On the Tools menu, click Global Options.
2. Expand the File Readers node in the Options Editor dialog box, and click the Leica option.
The Leica page is displayed.
3. Set the value in the Sample rate box if you want to adjust the frequency of points extracted from the
input file. By increasing the rate, the number of points extracted will be reduced. This will have the
effect of reducing the image resolution, but increasing the speed with which the file is loaded.
4. From the Point colors drop-down list, choose how the points are brought through when opening
Leica files. None brings through the points set to white. Raw Intensities uses the intensities set in
the file. Color uses the color settings in the file. Color-Mapped Intensity transforms point intensity
values to a spectrum of RGB colors. The Gamma Correction Level is used to alter the gamma
correction values whilst using the point intensities set in the file. Gamma values can range between
0.0 and 1.0 are useful to correct weighting of intensity values at the lower end of the intensity range.
5. Click OK to set these options or Cancel to exit the dialog without setting them.
Z+F Scan Files
Z+F™ scan files can be read by NavisWorks.
Note:
Converting Files
102