2012

JTOpen Page
Use this page to adjust the options for the JTOpen file reader.
Faceting Factor Enter the required value to control the level of faceting that
takes place.
The faceting factor must be greater or equal to 0, where 0 results in the faceting
factor being turned off. The default value is 1. To get twice the number of
facets, double this value. To get half as many facets, halve this value. Larger
faceting factors result in more polygons to a model and larger Autodesk
Navisworks files.
Max Facet Deviation This setting controls the greatest distance between the
edge of a facet and the actual geometry.
If this distance is greater than the Max Facet Deviation value, Autodesk
Navisworks adds more facets.
If the Max Facet Deviation is set to 0, then this function is ignored.
Retriangulate JT Brep Models Select this check box to use BREP entities to
create geometry.
Clear this check box to use tri-strips to create geometry.
See also:
JTOpen File Reader (page 184)
MAN Page
Use this page to adjust the options for the MAN file reader.
Include Line-Geometry Select this check box to convert MicroGDS
line-primitives.
When this check box is clear, the file reader ignores line-geometry.
Set Facet Circle Specifies the number of facets for arcs.
Enter the number of straight line segments required to facet a whole circle.
This option corresponds to the MicroGDS Set Facet preference.
Texture Path Specifies the path to the folder containing images used in
MicroGDS Materials. This path is used as the base for relative paths for materials
that use image files.
This option corresponds to the MicroGDS Renderer Textures preference.
Options Editor Dialog Box | 805