2012

will allow the camera to roll while navigating (resulting in behavior almost
like the Fly tool).
Use Viewpoint Linear Speed When this check box is selected, the Walk tool
will respect the Viewpoint Linear Speed setting. In this case, the Walk speed
slider will act like a multiplier.
When this check box is clear, the Walk tool will work independently of the
Viewpoint Linear Speed setting, using a fixed value set with the slider.
Walk Speed Sets the speed of the Walk tool from 0.1 (very slow) to 10 (very
fast).
ViewCube Page
Use the options on this page to customize the ViewCube behavior.
Show the ViewCube Indicates whether or not the ViewCube is displayed in
the Scene View.
TIP You can also toggle the ViewCube by clicking View tab ➤ Navigation Aids
panel ➤ ViewCube .
Size Specifies the size of the ViewCube. You can choose from the following
options:
■ Automatic
■ Tiny
■ Small
■ Medium
■ Large
NOTE In automatic mode, the size of the ViewCube is relative to the size of the
Scene View, and ranges between medium and tiny.
Inactive Opacity When the ViewCube is inactive, that is your cursor is distant
from the ViewCube, it appears transparent. To control the opacity level, choose
from the following options:
■ 0%
■ 25%
■ 50%
■ 75%
Options Editor Dialog Box | 783