2012

Table Of Contents
By default, this check box is clear, as saving the state information with each
viewpoint requires a relatively large amount of memory.
Override Material Select this check box to save viewpoints with material
override information. When you use a viewpoint again, the material overrides
set when the viewpoint was saved are reapplied.
By default, this check box is clear, as saving the state information with each
viewpoint requires a relatively large amount of memory.
Override Linear Speed By default, the linear navigation speed is directly
related to the size of your model. Select this check box, if you want to set a
specific navigation speed manually. This option is used in a 3D workspace
only.
Default Linear Speed Specifies the default linear speed value. This option is
used in a 3D workspace only.
Default Angular Speed Specifies the default speed at which the camera turns.
This option is used in a 3D workspace only.
Collision
Settings Opens the
Default Collision dialog box (page 747) where you can
adjust the collision, gravity, crouching and third person view settings.
Links Page
Use the options on this page to customize the way links are displayed in the
Scene View.
TIP If you want to restore the default values, click the Defaults button.
Show Links Toggles the display of links in the Scene View.
In 3D Indicates whether the link icons are drawn in 3D in the Scene View.
Select this box if you want the links to float in 3D space just in front of their
attachment points to the geometry.
If the links become obscured by other geometry, clear this check box to draw
the link icons in 2D over the top of geometry.
Max Icons Specifies the maximum number of icons to draw in the Scene
View.
Options Editor Dialog Box | 771