2012

Plane Selects the vector that represents the angle of the section plane. The
drop-down list contains a range of pre-defined values. If you select the Define
Custom option, you can manually define the “up” vector for the plane.
Enabled Indicates whether the selected section plane is active or not.
Interpolate Determines whether or not Autodesk Navisworks automatically
interpolates between the current and the last keyframes. This is the default
option. When disabled, there is no gradual movement between the two
keyframes; instead the animation instantly jumps to the position/view of the
second keyframe when it’s reached. Also, there will be no colored animation
bar between the keyframes.
Pointing device: Double-click a keyframe
Shortcut menu: Right-click a keyframe, and click Edit on the shortcut
menu.
Edit Link Dialog Box
Use this dialog box to modify the selected database link.
For information about the settings on this dialog box, see the
New Link dialog
box
(page 763).
Pointing device: File Options dialog box ➤ DataTools tab ➤ Edit
Edit Viewpoint Dialog Box
Use this dialog box to edit viewpoint attributes.
Camera
Position Enter the X, Y, and Z coordinate values to move the camera into
this position. The Z coordinate values are not available in a 2D workspace.
Look At Enter the X, Y, and Z coordinate values to change the focal point
for the camera. The Z coordinate values are not available in a 2D workspace.
Vertical Field of View, Horizontal Field of View Defines the area of the
scene that can be viewed through the camera in a 3D workspace only. You
can adjust the values for both vertical and horizontal angles of view.
A larger value produces a wider angle of view and a smaller value produces a
narrower, or more tightly focused, angle of view.
Edit Link Dialog Box | 751