2012

Edit Key Frame - Camera
Time Enables you to reposition the time of this keyframe. The value is the
number of seconds since the start of the scene; it is not relative to the last
keyframe.
Position Enter the X, Y, and Z coordinate values to move the camera into
this position.
Look At Enter the X, Y, and Z coordinate values to change the focal point
for the camera.
Vertical Field of View, Horizontal Field of View Defines the area of the
scene that can be viewed through the camera. You can adjust the values for
both vertical and horizontal angles of view. A larger value produces a wider
angle of view and a smaller value produces a narrower, or more tightly focused,
angle of view.
NOTE When you modify the Vertical Field of View, the Horizontal Field of
View is automatically adjusted, and vice versa to match the aspect ratio in Autodesk
Navisworks.
Roll Rotates the camera around its front-to-back axis. A positive value rotates
the camera counterclockwise, and a negative value rotates it clockwise.
Interpolate Determines whether or not Autodesk Navisworks automatically
interpolates between the current and the last keyframes. This is the default
option. When disabled, there is no gradual movement between the two
keyframes; instead the animation instantly jumps to the position/view of the
second keyframe when it's reached. Also, there will be no colored animation
bar between the keyframes.
Edit Key Frame - Section Plane
Time Enables you to reposition the time of this keyframe. The value is the
number of seconds since the start of the scene; it is not relative to the last
keyframe.
Section Planes A list of current section planes.
Adds a section plane to the Section Planes list.
Deletes the section plane selected in the Section Planes list.
Distance The distance of the selected section plane across the model.
750 | Chapter 17 Reference