2012

Edit Key Frame - Animation Set
All values are relative to the previous keyframe, or, if it is the first keyframe,
relative to the model’s starting position.
Time Enables you to reposition the time of this keyframe. The value is the
number of seconds since the start of the scene; it is not relative to the last
keyframe.
Translate Enter the X, Y, and Z coordinate values to move the selected objects
into this position.
Center Enter the X, Y, and Z coordinate values to move the center point of
the rotation or scale into this position.
Rotate Enter the degrees of rotation around X, Y, and Z axis to move the
selected objects into this position.
Orientation Enter the degrees of rotation around X, Y, and Z axis to modify
the orientation of the rotation.
NOTE 0,0,0 represents world up.
Scale Enter the scaling factor around X, Y, and Z axis; 1 being the current
size, 0.5 half, 2 being double and so on.
Color This check box indicates whether the color change is recorded in the
keyframe or not. Enter the R (red), G (green), and B (blue) values for the new
color.
If you don’t want to enter the R, G, B values manually, click
and select
the desired color.
Transparency This check box indicates whether the transparency change is
recorded in the keyframe or not.
Enter the % value to adjust the transparency level (0 to 100%). A higher value
makes the element more transparent; a lower value makes the element more
opaque.
If you don’t want to enter the transparency value manually, use the slider
to adjust the transparency level.
Interpolate Determines whether or not Autodesk Navisworks automatically
interpolates between the current and the last keyframes. This is the default
option. When disabled, there is no gradual movement between the two
keyframes; instead the animation instantly jumps to the position/view of the
second keyframe when it's reached. Also, there will be no colored animation
bar between the keyframes.
Edit Key Frame Dialog Box | 749