2012

NOTE A comment is automatically written against a clash or clash group when it
is unassigned.
Review Clash Results
Autodesk Navisworks Manage 2012 provides tools to add comments and
redlines to clash results. If multiple clashes are associated with a single design
issue, consider manually grouping them together at the beginning of your
review process. See
Manage Clash Results (page 705).
Visually Identify Clashes in a Model
As you click on a clash result, you are automatically zoomed into the clash
location in the Scene View. The Clash Detective tool contains a number
of Display options that enable you to adjust the way clashes are rendered in
the model.
For example, you can visually isolate the clashing items in the Scene View
making it easier to focus on them.
You can also adjust the viewing context to visually identify where each clash
is within the model, and customize the way Autodesk Navisworks transitions
between clashes.
When you navigate your clash results in the Scene View, any changes that
you apply to clash viewpoints will be automatically saved, if the Save
Viewpoint check box is selected on the Results tab. This option is designed
to allow you to tailor the viewpoint for a clash result, and to store redlining.
If you navigated away from the clash and cannot locate it in the Scene View,
you can reset the viewpoint to focus on the clash point again.
To show only the clash results that involve your current selection
1 Select the desired geometry on the Selection Tree or in the Scene
View.
2 In the Clash Detective window click the Results tab, select the Select
Filter check box.
Only those clashes that involve the selected items are now shown in the
Results area.
708 | Chapter 15 Locate and Manage Interferences