2012

Manage Batches of Clash Tests
To manage batches of clash tests
1 If the Clash Detective window is not already open, click Home tab
➤ Tools panel ➤ Clash Detective
.
2 Click the Batch tab.
NOTE A summary of the status of all clash tests is displayed, enabling you
to quickly identify 'open' or unresolved issues.
3 Use the buttons to manage the tests:
■ Click Add to append a new test to the current batch.
■ Click Delete to delete the currently selected test in the Tests Area
from the batch.
■ Click Compact to delete all clash results with a
clash status (page
833) of Resolved from the test to create a smaller file.
■ Click Clean to reset all tests so that they are as if you had not yet
run them. In other words, this will make their
clash test status (page
833)New.
■ Click Clear All to remove all tests from the batch in order to start
from scratch.
NOTE You can rename a test by selecting it and either pressing F2, or by clicking
again the highlighted text. You can also sort the columns in the Tests area
alphanumerically by clicking the column heads. Clicking again toggles between
ascending and descending order.
Merge Clash Tests from Multiple Files
When you merge files (Home tab ➤ Project panel ➤ Merge
), Autodesk
Navisworks combines all of the clash test data. No duplicate geometry from
the files will be loaded.
See also:
Merge Files (page 225)
Clash Batches | 687