2012

■ For clash groups, the viewpoint image is the aggregate viewpoint for
the group.
■ You need to create a separate folder for the report and its viewpoint
images.
The Write Report Button
Creates the selected report and saves it into the selected location.
Set Up and Run a Clash Test
To set up and run a clash test
1 Select a previously run test from a
batch (page 686), or start a new test.
2 Set the
rules (page 694) for the test.
3
Select (page 696) the required items to be included in the test, and set the
test type options.
4 Review the
results (page 703) and assign issues to responsible parties.
5 Produce a
report (page 717) of the identified issues and circulate for review
and resolution.
Clash Batches
In this section you will learn how to set up and manage tests and test batches.
Run Clash Tests
To run clash tests
1 If the Clash Detective window is not already open, click Home tab
➤ Tools panel ➤ Clash Detective
.
2 Click the Batch tab.
3 To run all of the tests in the batch, click the Update button.
To run a single test from a batch, select it in the Tests Area, click the
Select
Tab
(page 674), and click the Start button.
686 | Chapter 15 Locate and Manage Interferences