2012

6 Click Capture Keyframe on the Animator toolbar to create a
keyframe with the initial position of the section plane.
7 In the timeline view, move the black time slider to the right to set the
desired time.
8 Use the gizmo again to adjust the depth of your cross-section cut.
9 To capture the current plane changes in a keyframe, click Capture
Keyframe on the Animator toolbar.
To capture cross-sectional cuts by moving a section box
1 If the Animator window is not already open, click Animation tab
➤ Create panel ➤ Animator .
2 Select the desired section plane set in the Animator tree view.
3 Click Viewpoint tab ➤ Sectioning panel ➤ Enable Sectioning
.
Autodesk Navisworks opens the Sectioning Tools tab on the ribbon,
and draws a section plane through the model in the Scene View.
4 Click Sectioning Tools tab ➤ Mode panel ➤ Box .
5 Click Sectioning Tools tab ➤ Transform panel and click the
sectioning gizmo you want to use (move
, rotate , or scale
). By default, the move gizmo is used.
Drag the gizmo to adjust the initial position of the section box in the
Scene View.
6 Click Capture Keyframe
on the Animator toolbar to create a
keyframe with the initial position of the section box.
7 In the timeline view, move the black time slider to the right to set the
desired time.
8 Use the gizmo again to adjust the depth of your cross-section cut.
9 To capture the current section box changes in a keyframe, click Capture
Keyframe
on the Animator toolbar.
Create Object Animations | 537