2011

To review soft clash results
1 In the Clash Detective window, set up and run a soft clash test (see “
Soft Clashing” on page 445).
2 Click the Results tab.
3 Select the Simulation check box in the Display area.
4 In the Clash Detective window, Results tab, select a clash in the Results list.
5 Click the Animation tab on the ribbon. The Playback Position slider on the Playback panel is moved to the
exact point at which the clash occurs. You can move the slider to investigate the events happening
immediately before and after the clash.
6 Repeat this process to review all found clashes.
To review time-based soft clash results
1 In the Clash Detective window, set up and run a time-based soft clash test (see “Time-Based Soft Clashing”
on page 445).
2 Click the Results tab.
Time-Based and Soft Clash Test Results | 453