2011

To save viewpoints with clash results
1 In the Clash Detective window, click the Results tab.
2 In the Display area, make sure the Save Viewpoint check box is selected.
3 Click a clash result in the Results list. This allows you to tailor the viewpoint for a clash result. It also enables
redlining to be stored with a clash result.
NOTE Once redlining has been added, subsequent changes to the viewpoint due to navigation will not be saved.
In order to save a different viewpoint, the redlining must first be removed using the redline Erase tool.
Add Review Comments and Redlines
You can add comments and redlines to clash results. For more information, see “Comments, Redlines, and Tags”
on page 253.
Time-Based and Soft Clash Test Results
To review time-based clash results
1 In the Clash Detective window, set up and run a time-based clash test (see “
Time-Based Clashing” on page
444).
2 Click the Results tab.
3 Select the Simulation check box in the Display area.
4 If the TimeLiner window is not already open, click Home tab ➤ Tools panel ➤ TimeLiner , and click
the Simulation tab.
5 In the Clash Detective window, Results tab, select a clash in the Results list.
6 The simulation slider in the TimeLiner window is moved to the exact point at which the clash occurs. You
can move the slider to investigate the events happening immediately before and after the clash.
7 Repeat this process to review all found clashes.
452 | Chapter 16 Locate and Manage Interferences