2011

Table Of Contents
NOTE Multiple clashes can be changed by either holding down the CTRL key whilst selecting individual clashes (the
last selected being shown in the Scene View), or by holding down the SHIFT key and selecting another clash, thereby
selecting all clashes between the two including the first and last (again, the last selected being shown in the Scene
View).
To change status of a clash group
1 On the Results tab, click the required clash group.
2 Click the drop-down button in the Status box, and select the appropriate status.
NOTE Changing status of a clash group changes status of all clashes in this group.
Review Clash Results
Autodesk Navisworks Manage 2011 provides tools to add comments and redlines to clash results. If multiple
clashes are associated with a single design issue, consider manually grouping them together at the beginning of
your review process. See
Manage Clash Results on page 448.
Visually Identify Clashes in a Model
As you click on a clash result, you are automatically zoomed into the clash location in the Scene View. The Clash
Detective tool contains a number of Display options that enable you to adjust the way clashes are rendered in
the model.
For example, you can visually isolate the clashing items in the Scene View making it easier to focus on them.
You can also adjust the viewing context to visually identify where each clash is within the model, and customize
the way Autodesk Navisworks transitions between clashes.
To show only the clash results that involve your current selection
1 Select the desired geometry on the Selection Tree or in the Scene View.
2 In the Clash Detective window click the Results tab, select the Select Filter check box.
Only those clashes that involve the selected items are now shown in the Results area.
To change how the clashing items are highlighted
1 In the Clash Detective window, click the Results tab.
2 Select the Highlight check boxes for Item 1 and Item 2 to override the color of the clashing items in the
Scene View with the color of the status of the selected clash.
To highlight all clashes in the Scene View
1 In the Clash Detective window, click the Results tab.
2 Select the Highlight All check box in the Display area. All found clashes are highlighted in the color of their
status.
Review Clash Results | 449