2011

Table Of Contents
Run Clash Tests
To run clash tests
1 If the Clash Detective window is not already open, click Home tab Tools panel Clash Detective
.
2 Click the Batch tab.
3 To run all of the tests in the batch, click the Update button.
To run a single test from a batch, select it in the Tests Area, click the
Select Tab, and click the Start button.
Manage Batches of Clash Tests
To manage batches of clash tests
1 If the Clash Detective window is not already open, click Home tab Tools panel Clash Detective
.
2 Click the Batch tab.
3 Use the buttons to manage the tests:
Click Add to append a new test to the current batch.
Click Delete to delete the currently selected test in the Tests Area from the batch.
Click Compact to delete all clash results with a clash status of Resolved from the test to create a smaller
file.
Click Clean to reset all tests so that they are as if you had not yet run them. In other words, this will
make their clash test status New.
Click Clear All to remove all tests from the batch in order to start from scratch.
NOTE You can rename a test by selecting it and either pressing F2, or by clicking again the highlighted text. You can
also sort the columns in the Tests area alphanumerically by clicking the column heads. Clicking again toggles between
ascending and descending order.
Merge Clash Tests from Multiple Files
When you merge files (Home tab Project panel Merge ), Autodesk Navisworks combines all of the
clash test data. No duplicate geometry from the files will be loaded.
See also:
Merge Files on page 145
Import Clash Tests
Clash tests can be imported into Autodesk Navisworks, and used to set up pre-defined, generic clash tests.
NOTE If a clash test you want to import contains a Search Set as one of the clash selections, then the Search Set will
also be imported along with all other test rules, options and selection information.
Run Clash Tests | 437