2010

Table Of Contents

2 Click the Batch tab.

3 To run all of the tests in the batch, click the Update button.

To run a single test from a batch, select it in the Tests Area, click the Select Tab, and click the Start button.

Manage Batches of Clash Tests

To manage batches of clash tests

1 If the Clash Detective window is not already open, click Tools ➤ Clash Detective.

2 Click the Batch tab.

3 Use the buttons to manage the tests:

■ Click Add to append a new test to the current batch.

■ Click Delete to delete the currently selected test in the Tests Area from the batch.

■ Click Compact to delete all clash results with a

clash status of Resolved from the test to create a smaller

file.

■ Click Clean to reset all tests so that they are as if you had not yet run them. In other words, this will

make their clash test status New.

■ Click Clear All to remove all tests from the batch in order to start from scratch.

NOTE You can rename a test by selecting it and either pressing F2, or by clicking again the highlighted text. You can

also sort the columns in the Tests area alphanumerically by clicking the column heads. Clicking again toggles between

ascending and descending order.

Merge Clash Tests from Multiple Files

When you merge files (File ➤ Merge), Autodesk Navisworks combines all of the clash test data. No duplicate

geometry from the files will be loaded.