5.0

thickness is less than the maximum clearance used.
See the diagram below for an example of where this ignore rule would be applied:
Pipe 1 has insulation thickness t and C is the maximum clearance (thickest insulation) required
anywhere in the current model. Any items (2) that come within the range of t to C will not be
reported in the results.
• Same Property Value. This rule will ignore clashing items that share a specific property.
• Same Selection Set. This rule will ignore clashing items that are in the same specified Selection
Set.
• Specified Selection Sets. This rule will ignore clashing items where each item is in a specified
Selection Set
4. In the Rule Description box, click on each of the underlined values to define your custom rule. The
customizable values available with the built in templates are:
Clash Rules
349