5.0

• Align Bottom
• Align Top
• Align Front
• Align Back
• Align Left
• Align Right
Note
Each plane for each section remembers its position, so the slider will move when you choose
another plane.
5. Move the slider to interactively position the section plane to the required location. The number in the
edit box shows the position of the section plane from the origin and will be updated when moving the
section plane. You can also type in the location of the origin in this edit box for exact positioning of
the plane.
Note
You can also use the cursor keys and mouse wheel for simple sliding of the section plane through
the model.
6. Clicking on the Set Range button helps you to set a finer resolution for sectioning large models.
What this button does is limit the range of the section planes to the bounding box limits of the
currently selected items. For more information on selecting items, see Chapter 9, Selecting Items .
Clicking this button with nothing selected reset the section range to the limits of the whole model,
which is the default.
7. If you have more than one section plane enabled, you can delete this active plane using the delete
button . The next enabled plane will then become the active plane.
Sectioning
208