5.0

2. Check the Area, Enable check box to enable the definition of the screen area (in pixels) below which
objects are culled and type in the number of pixels in the text box.
3. In the Near Clip Plane area, check the Automatically generated check box to tell JetStream to
constrain the near plane to give the best view of the model it possibly can. Alternatively, uncheck this
box to manually constrain the near clip plane. JetStream will put the near clip plane no further than
the value you type into the Furthest distance text box.
4. Similarly, in the Far Clip Plane area, check the Automatically generated check box to tell
JetStream to constrain the far plane to give the best view of the model it possibly can. Alternatively,
uncheck this box to manually constrain the far clip plane. JetStream will put the far clip plane no
closer than the value you type into the Closest distance text box.
5. From the Backface drop-down, select On to enable backface culling of all objects. Select Solid to
cull the backface of solid objects only. This is the default option and that which you are most likely to
require. If you find that parts of items are missing in the JetStream scene, you might want to disable
this option, by selecting Off.
6. Click OK to set these options or Cancel to exit the dialog without setting them.
Display Modes
186