5.0

is equivalent to setting a Plain Color in the Background tab of the Presenter dialog. This option is only
available if you have the JetStream Presenter plugin.
Setting the background color
1. Go to Tools, Background Color
2. Select the color from the Windows™ color palette.
3. Click OK to set the background color or Cancel to exit the dialog without setting it.
12.2. Culling Options
There are three methods of culling objects in JetStream: backface, by area, and by near or far plane. All
of these options are configurable using the Culling options tab.
Backface culling only draws the front face of every polygon in JetStream, which is clearly faster.
Sometimes, however, the conversion process mixes up the front and back face of polygons and so you
have to tell JetStream to draw both sides in order to not see right through some objects.
Area culling options allow you to set the size of objects within a model that will not be displayed. For
example, if you were to set the value to 100 pixels any object within the model that would be drawn less
than 10x10 pixels in size will not be displayed.
Culling options by near and far plane allows some degree of control over the resolution of the axis
perpendicular to the screen. JetStream uses the near and far clip plane to maximize the resolution of the
model on screen. The near and far clip plane boxes dictate constraints for the near and far culling planes.
Setting culling options
1. Go to Tools, File Options, Culling
The Culling dialog is displayed
Display Modes
185