5.0

8.14.3. Aligning With The Z-Axis
This function toggles between Look From, Top and Look From, Bottom views.
To align the viewpoint with the z-axis
• Go to Viewpoint, Navigation Tools, Align Z
or
• Click Align Z on the Navigation Tools toolbar.
8.14.4. Looking From a Preset Viewpoint
When this option is chosen the model is displayed from this viewpoint in the main navigation view. This is
equivalent to toggling the Align X, Align Y and Align Z buttons on the Navigation Tools toolbar.
Looking from a preset viewpoint
1. Go to Viewpoint, Look From
2. Choose any direction from Top, Bottom, Front, Left, Back and Right.
8.15. Tilt
The slider on this control bar provides direct control over the tilt angle of the camera, in degrees below
(negative) or above (positive) the horizontal at the base of the tilt bar.
This is particularly useful in walk mode to look up and down. If your mouse has a wheel, this can be used
to adjust the tilt angle.
To switch the tilt bar on and off
• Click on View, Toolbars, Tilt.
The Tilt control bar is displayed
Navigating
138