5.0

• Click Set Up on the Navigation Tools toolbar.

Alternatively, to set the world up vector to one of the orthogonal axes

• Go to Viewpoint, Set World Up and choose one of the pre-defined axes (+X Axis, -X Axis, +Y Axis,

-Y Axis, +Z Axis, or -Z Axis).

Note

Navigation modes Walk, Turntable and Orbit all use the World Up vector, so navigation will occur

at whatever angle is set using this function.

This button is not on the toolbar by default, but can be added by customizing it (see Section 17.3,

“ Customizing toolbars ”).

8.14. Preset Viewpoints

The orthogonal viewpoints are preset inside JetStream and can be accessed from the Navigation Tools

toolbar and the Viewpoints menu.

8.14.1. Aligning With The X-Axis

This function toggles between Look From, Front and Look From, Back views.

To align the viewpoint with the x-axis

• Go to Viewpoint, Navigation Tools, Align X

• Click Align X on the Navigation Tools toolbar.

8.14.2. Aligning With The Y-Axis

This function toggles between Look From, Left and Look From, Right views.

To align the viewpoint with the y-axis

• Go to Viewpoint, Navigation Tools, Align Y

• Click Align Y on the Navigation Tools toolbar.

Navigating

137