5.0

Files\NavisWorks 5\NWExport\LwNw_Export.mnu, for AutoCAD 2000 based applications,
this will be C:\Program Files\NavisWorks 5\NWExport2000\LwNw_Export.mnu, and for
AutoCAD 2004 based applications, this will be C:\Program Files\NavisWorks
5\NWExport2004\LwNw_Export.mnu, and so on.
3. Click Load and then Yes to the dialog that appears.
You should now have a NavisWorks menu just before the Help menu and this will be reloaded into future
AutoCAD sessions. This menu contains 4 items:
• Publish .nwd
See Section 22.2, “ Publishing from AutoCAD ” for more details.
• Export .nwc
See Section 7.2.1, “ AutoCAD .nwc Exporter ” for more details.
• NavisWorks Export Options
See Section 7.2.1, “ AutoCAD .nwc Exporter Options ” for more details.
• Navigator
See Section 7.3.1, “ NavisWorks Navigator for AutoCAD ” for more details.
AutoCAD .nwc Exporter Options
Available from the NavisWorks menu, or by typing nwopt at the command prompt, this enables you to
configure various elements of the exported file to your choosing.
See Section 7.1.4, “ DWG and DXF File Reader Options ” for details on what each of the options does.
Once you have set the options, future exports of .nwc and publishes of .nwd files will use these settings.
7.2.2. Revit .nwc Exporter
JetStream Roamer cannot read native Revit files directly, however support for both Revit Building and
Revit Structures can be achieved through exporting a JetStream .nwc cache file, which can then be read
into Roamer.
Note
The Microsoft .NET Framework is not installed by JetStream and must be installed for JetStream
and Revit to work correctly on the same machine. If these components are not installed an error
message will be displayed when Revit is started. The version of .NET Framework to install is
dependent upon the version of Revit being used.
AutoDesk Revit Building 9 / Structure 3 / Systems - Install Microsoft .NET Framework 2.0
[http://www.navisworks.com/downloads/dotnetframework20.htm]
AutoDesk Revit Building 8 / Structure 2 - Install Microsoft .NET Framework 1.1
[http://www.navisworks.com/downloads/dotnetframework11.htm]
Converting Files
110