2011

3 In the License Transfer Utility, click Sign In.
4 On the Log In page, enter your Autodesk user ID and password and click
Log In.
5 On the License Import Confirmation page, click Finish.
The license is now imported to the computer and you can run your
Autodesk product on this computer. If you want to transfer the license
to another computer, repeat the export and import procedures.
Troubleshoot a Stand-alone License Error
Hardware Changes
If you replace or reconfigure hardware on the computer where your Autodesk
product license resides, the stand-alone license might fail. You will not be able
to use your product.
To prevent damage to your product license, use the License Transfer Utility
to export your license file. After you make the hardware change, you can
import the license file back. For instructions about using the License Transfer
Utility, see Transfer Your Stand-Alone License.
NOTE If you get a license error when you change your hardware, you may have
to reactivate your license. See
Activate Your Product on page 68.
Reinstalling an Operating System
If you reinstall your operating system on the computer where your Autodesk
license resides, the license might fail. You will not be able to use your product.
To resolve a license error in this case, you must reactivate your product. See
Activate Your Product on page 68.
To prevent a license error when you reinstall an operating system
NOTE If using Norton Ghost
™
or another image utility, do not include the Master
Boot Record.
Troubleshoot a Stand-alone License Error | 75