2011

4 Locate the Physical Address line. Write down the physical address without
the dashes. This is your twelve-character host ID.
NOTE If your server has more than one network adapter, select the one that
corresponds to a physical network adapter. To determine which adapters are
physical: in the Windows command prompt, enter ipconfig /all, and then
view the Description field above each physical address. If there is more than
one physical network adapter, it does not matter which one you use. Devices
such as VPN adapters, PPP adapters, and modems are not valid.
5 Close the Windows command prompt.
To obtain the host name and ID using lmtools.exe
You should be logged in with Administrator rights when working with the
LMTOOLS utility.
1 Click Start ➤ All Programs ➤ Autodesk ➤ Network License Manager
➤ LMTOOLS Utility.
2 In the LMTOOLS program, click the Systems Settings tab.
3 On the Systems Settings tab, locate the Computer/Hostname box. Copy
the host name and paste the information into a text editor.
4 Locate the Ethernet Address box. The Ethernet address is the host ID. It
consists of twelve characters. Write down the information. If your Ethernet
address is more than twelve characters, write down the first twelve
characters only.
NOTE If your server has more than one Ethernet adapter, select one that
corresponds to a physical network adapter.
5 Close lmtools.exe.
To obtain the host name and ID using the Mac OS X or Linux terminal window
1 Launch a Terminal window.
2 Go to the directory where lmutil is installed.
3 Retrieve the host name by entering the following in Terminal:
<prompt>./lmutil lmhostid -hostname
The host name is displayed.
Obtain the Server Host Name and Host ID Manually | 101