2010

Table Of Contents
2 Select Edit Deformers > Paint Cluster Weights Tool > . This displays
the smilingFace in grayscale.
The white area shows the points that make up the cluster. The whiteness
also indicates the weightshow much the points move in response to
the movement of the cluster handle. White indicates a cluster weight of
1the points move the same distance as the handle. By default, each
point has a weight of 1.
Black indicates a cluster weight of 0. The points do not move in response
to cluster handle movement. Note that regions that are not part of the
cluster are also black.
Although there are no gray regions currently, gray means the movement
is partial. The lighter the gray, the more the movement. Gray regions
indicate a cluster weight between 0 and 1.
3 In the Paint Attributes Section of the Tool Settings window, set the
following:
Paint Operation: Replace
Value: 0.5
4 Click the Flood button.
This gives all the cluster points a weight of 0.5. The white region is now
gray:
Editing cluster weights | 349