2009

Table Of Contents
The selected vertices move down a bit, as the weight of 0.5 lessens the
effect of the prior movement of the cluster by 50%.
5 To check the shape with full-color shading, click the Select Tool. (You
might also prefer to cancel the selection of smilingFace to eliminate the
display of the highlighted wireframe.)
6 To return to the Paint Cluster Weights Tool, select smilingFace and Edit
Deformers > Paint Cluster Weights Tool >
again.
7 In the Tool Settings window, make these settings:
Radius(U): 0.1Opacity: 0.3Paint Operation: Replace Value: 1 The settings
have this effect when painting:
A Radius(U) of 0.1 sets the radius of the region affected by the stroke.
The red circle icon on the face displays the radius.
An Opacity of 0.3 scales down the effect of painting weight values so you
can build up values gradually with repeated strokes.
A Replace operation paints the Value specified on the points stroked.
A Value of 1 sets the weight value you paint on the points.
8 Paint the region at the corners of the mouth with repeated strokes until
the face looks roughly like the following figure. If your results differ from
the figure significantly, undo the strokes and try again.
336 | Chapter 7 Character Setup