2010

rpm -ivh Maya2010_0_64-docs_en_US-2010.0-#.x86_64.rpm
The files are installed in the following directory:
/usr/autodesk/maya2010-x64
7 Run the following command to set whether you are using a network or
a stand-alone license:
/usr/autodesk/maya2010-x64/bin/licensechooser
/usr/autodesk/maya2010-x64/ <licensetype> unlimited
where you specify standalone or network for <licenseType>.
8 Run the following command to set your shared libraries:
export LD_LIBRARY_PATH=/opt/Autodesk/Adlm/R1/lib64/
9 Run the following commands to register Maya with the Autodesk licensing
software, where <productKey> is your product key, and <serialNum> is
your serial number:
■ (Stand-alone licensing)
/usr/autodesk/maya2010-x64/bin/adlmreg -i S <productKey>
2010.0.0.F <serialNum>
/var/opt/Autodesk/Adlm/Maya2010/MayaConfig.pit
■ (Network licensing)
/usr/autodesk/maya2010-x64/bin/adlmreg -i N <productKey>
2010.0.0.F <serialNum>
/var/opt/Autodesk/Adlm/Maya2010/MayaConfig.pit
For example:
/usr/autodesk/maya2010-x64/bin/adlmreg -i S 657B1 2010.0.0.F
000-00000000
/var/opt/Autodesk/Adlm/Maya2010/MayaConfig.pit
These commands return a Registration succeeded message, and you
can now run Maya using your stand-alone or network license.
Additional Linux Notes
This section provides information for configuring Maya to run on Linux,
describes differences between Maya for Linux and other versions of Maya, and
provides other information specific to using Maya on the Linux operating
system. For complete information on limitations and possible workarounds,
also refer to the Maya 2010 Release Notes.
Install Maya on Linux (Step by Step) | 25