Shortcut Key Guide

7
MULTI-CHARACTER COMMAND ALIASES
Cable & Harness
CF CREATE FOLD / Creates fold.
CR CREATE RIBBON CABLE / Creates a
ribbon cable between a start and end
connector.
CS CREATE SEGMENT / Creates a harness
segment.
CV PLACE CONNECTOR VIEWS / Places
connector views.
CW CREATE WIRE / Creates a wire between
selected pins within a harness assembly.
E EDIT / Edits nailboard sketch.
EH EXPORT HARNESS DATA / Exports
harness data .
F FAN IN / Collapses wire stubs on top of
one another to reduce the detail or clutter
in nailboard documentation.
FO FAN OUT / Equally distributes wire stubs
about the endpoint of a segment using
the specied angle and sorting direction.
HA CREATE HARNESS / Adds the harness
subassembly to an assembly le with the
specied name and location, and displays
the Cable and Harness tab.
HD HARNESS DIMENSION / Adds a driven,
aligned dimension between 2 points.
HP HARNESS PROPERTIES / Custom
properties of harness components.
IH IMPORT HARNESS DATA / Imports
harness data.
L CABLE & HARNESS LIBRARY / Adds new
library denitions, and modies, copies,
and deletes existing library denitions for
harness objects such as wires, cables, raw
ribbon cables, and virtual parts.
NB NAILBOARD / Species the harness
assembly and setup to create or edit a
nailboard view.
P PIVOT / Fixes segment points so you can
drag the selected segment relative to that
xed point.*
P PLACE PIN / Places a pin.*
PD PROPERTY DISPLAY / Displays properties
for the selected objects.
PG PLACE PIN GROUP / Automatically places
multiple pins with the specied naming,
conguration, and orientation on a part.
RG REPORT / Process reports for the active
harness assembly.
RH REVIEW HARNESS DATA / Reviews
harness data.
RT ROUTE / Routes cables and wires
manually.
RW RECONNECT WIRE PINS / Reconnects
wire pins.
SP CREATE SPLICE / Creates a splice.
TB TABLE / Creates a table.
U UNROUTE / Unroutes selected wires from
selected segments.
V ASSIGN VIRTUAL PARTS / Assigns virtual
parts.
Dimension
BD BASELINE DIMENSION / Adds baseline
dimensions.
BN BEND NOTES / Creates or edits a bend
note.
CN CHAMFER NOTE / Adds a chamfer note
to a drawing view.
D GENERAL DIMENSION / Adds a
dimension to a sketch or drawing.
HN HOLE/THREAD NOTES / Adds a hole or
thread note with a leader line.
O ORDINATE DIMENSION SET / Activates
the Ordinate Dimension Set command.
OD ORDINATE DIMENSION / Adds an
ordinate dimension.
PN PUNCH NOTES / Creates a punch note.
*NOTE: The same alias can perform different commands depending on the design environment and object you are working on.