2009
Table Of Contents
- Contents
- 1 Introducing Autodesk Inventor
- 2 Creating Sketches
- 3 Working with Sketched Features
- 4 Creating and Editing Placed Features
- 5 Creating and Editing Work Features
- 6 Using Projects to Organize Data
- 7 Managing Assemblies
- 8 Placing, Moving, and Constraining Components
- 9 Creating Assemblies
- 10 Analyzing Assemblies
- 11 Using Design Accelerator
- 12 Setting Up Drawings
- 13 Creating Drawing Views
- 14 Annotating Drawings
- Annotation Tools
- Using Styles to Format Annotations
- Working with Tables
- Creating Dimensions In Drawings
- Controlling Dimension Styles
- Placing Center Marks and Centerlines
- Adding Notes and Leader Text
- Using Hole and Thread Notes
- Working with Title Blocks
- Working with Dimensions and Annotations
- Printing Drawing Sheets
- Plotting Multiple Sheets
- Tips for Annotating Drawings
- 15 Using Content Center
- 16 Autodesk Inventor Utilities
- Index
15 In the Error box, click Edit.
16 On the Fillet dialog box, select the Edge selection mode. Press SHIFT while
you select the six edges where the base meets the other features of the
part. When these edges are removed from the selection set, click OK.
17 Add a 2 mm fillet to the edges where the base meets the other features of
the part. Notice how the fillets from Fillet 4 connect all the edges so only
one selection point is required on each side.
The completed part looks like the following figure.
Chamfers and Fillets | 83