2009
Table Of Contents
- Contents
- 1 Introducing Autodesk Inventor
- 2 Creating Sketches
- 3 Working with Sketched Features
- 4 Creating and Editing Placed Features
- 5 Creating and Editing Work Features
- 6 Using Projects to Organize Data
- 7 Managing Assemblies
- 8 Placing, Moving, and Constraining Components
- 9 Creating Assemblies
- 10 Analyzing Assemblies
- 11 Using Design Accelerator
- 12 Setting Up Drawings
- 13 Creating Drawing Views
- 14 Annotating Drawings
- Annotation Tools
- Using Styles to Format Annotations
- Working with Tables
- Creating Dimensions In Drawings
- Controlling Dimension Styles
- Placing Center Marks and Centerlines
- Adding Notes and Leader Text
- Using Hole and Thread Notes
- Working with Title Blocks
- Working with Dimensions and Annotations
- Printing Drawing Sheets
- Plotting Multiple Sheets
- Tips for Annotating Drawings
- 15 Using Content Center
- 16 Autodesk Inventor Utilities
- Index
Fillet feature added to part
10 Click Fillet, and then select the three edges where the rib meets the
cylinder at the top of the part. Change the radius to 2 mm, and then click
OK.
11 Click Fillet. Select the two front edges of the rib, and then select the back
edge of the rib (A). These edges are added to the selection set.
12 Select the three edges on each side where the base meets the other features
(B).
13 On the Fillet dialog box, select the Loop option in the Select Mode section.
Select anywhere on the back edge of the part above the base (C). Notice
how the Loop option automatically selected additional edges.
14 Verify that the fillet radius is set to 2 mm. When your preview looks like
the following figure, click OK. The fillet fails, and an error box is displayed.
82 | Chapter 4 Creating and Editing Placed Features