2009
Table Of Contents
- Contents
- 1 Introducing Autodesk Inventor
- 2 Creating Sketches
- 3 Working with Sketched Features
- 4 Creating and Editing Placed Features
- 5 Creating and Editing Work Features
- 6 Using Projects to Organize Data
- 7 Managing Assemblies
- 8 Placing, Moving, and Constraining Components
- 9 Creating Assemblies
- 10 Analyzing Assemblies
- 11 Using Design Accelerator
- 12 Setting Up Drawings
- 13 Creating Drawing Views
- 14 Annotating Drawings
- Annotation Tools
- Using Styles to Format Annotations
- Working with Tables
- Creating Dimensions In Drawings
- Controlling Dimension Styles
- Placing Center Marks and Centerlines
- Adding Notes and Leader Text
- Using Hole and Thread Notes
- Working with Title Blocks
- Working with Dimensions and Annotations
- Printing Drawing Sheets
- Plotting Multiple Sheets
- Tips for Annotating Drawings
- 15 Using Content Center
- 16 Autodesk Inventor Utilities
- Index
TRY IT: Add fillets to a part
1 Click Fillet from the Part Features panel bar and ensure that the Edge
Fillet button is selected. Select the two edges shown in the following
figure.
2 Rotate the part, and then select the same two edges on the other side. In
the Fillet dialog box, on the Constant tab, change the radius to 16 mm.
3 Under the edges and radius text, click the line that reads Click to Add.
For the next set of edges, select the two vertical edges at the corners at
the top of the part.
4 Change the radius for the fillet to 32 mm. When your dialog box and
preview look like the following figures, click OK.
Chamfers and Fillets | 79