2009
Table Of Contents
- Contents
- 1 Introducing Autodesk Inventor
- 2 Creating Sketches
- 3 Working with Sketched Features
- 4 Creating and Editing Placed Features
- 5 Creating and Editing Work Features
- 6 Using Projects to Organize Data
- 7 Managing Assemblies
- 8 Placing, Moving, and Constraining Components
- 9 Creating Assemblies
- 10 Analyzing Assemblies
- 11 Using Design Accelerator
- 12 Setting Up Drawings
- 13 Creating Drawing Views
- 14 Annotating Drawings
- Annotation Tools
- Using Styles to Format Annotations
- Working with Tables
- Creating Dimensions In Drawings
- Controlling Dimension Styles
- Placing Center Marks and Centerlines
- Adding Notes and Leader Text
- Using Hole and Thread Notes
- Working with Title Blocks
- Working with Dimensions and Annotations
- Printing Drawing Sheets
- Plotting Multiple Sheets
- Tips for Annotating Drawings
- 15 Using Content Center
- 16 Autodesk Inventor Utilities
- Index
You can change the lengths of lines and the radii of arcs within the sketch
at a later time.
5 Extrude, revolve, sweep, loft, or coil the parametric sketch to create the
first, or base feature of the part.
6 Repeat the process to create additional features, selecting join, cut, or
intersect to complete the part.
7 Document the part in an Autodesk Inventor drawing file to create the
desired annotated 2D drawing views.
Any time during the part modeling process, you can create a drawing file
(.idw) and begin making a fabrication drawing of your part. Changes you
make to your part are automatically reflected in drawing views of the
part.
Adding Sketched Features
Sketched part features depend on sketch geometry. The first feature of a part,
the base feature, is typically a sketched feature.
Adding Sketched Features | 57