2009
Table Of Contents
- Contents
- 1 Introducing Autodesk Inventor
- 2 Creating Sketches
- 3 Working with Sketched Features
- 4 Creating and Editing Placed Features
- 5 Creating and Editing Work Features
- 6 Using Projects to Organize Data
- 7 Managing Assemblies
- 8 Placing, Moving, and Constraining Components
- 9 Creating Assemblies
- 10 Analyzing Assemblies
- 11 Using Design Accelerator
- 12 Setting Up Drawings
- 13 Creating Drawing Views
- 14 Annotating Drawings
- Annotation Tools
- Using Styles to Format Annotations
- Working with Tables
- Creating Dimensions In Drawings
- Controlling Dimension Styles
- Placing Center Marks and Centerlines
- Adding Notes and Leader Text
- Using Hole and Thread Notes
- Working with Title Blocks
- Working with Dimensions and Annotations
- Printing Drawing Sheets
- Plotting Multiple Sheets
- Tips for Annotating Drawings
- 15 Using Content Center
- 16 Autodesk Inventor Utilities
- Index
4 Select each of the dimensions except the 13.0 horizontal dimension, and
the R6.0 and R2.0 radial dimensions.
5 Click Apply. Each of the selected dimensions are displayed. The
dimensions that were not selected are hidden. Click Cancel to exit dialog
box.
6 Drag the remaining dimensions until they appear as shown in the
following figure.
Add Centerlines and Center Marks
Centerlines and center marks are added to aid in the placement of drawing
dimensions.
TRY IT: Add centerlines and center marks
1 On the Drawing Annotation panel bar, click the Center Mark tool in the
panel bar or from the Drawing Annotation toolbar.
2 Click the outer circle of the boss and the two arcs of the slot.
256 | Chapter 14 Annotating Drawings