2009
Table Of Contents
- Contents
- 1 Introducing Autodesk Inventor
- 2 Creating Sketches
- 3 Working with Sketched Features
- 4 Creating and Editing Placed Features
- 5 Creating and Editing Work Features
- 6 Using Projects to Organize Data
- 7 Managing Assemblies
- 8 Placing, Moving, and Constraining Components
- 9 Creating Assemblies
- 10 Analyzing Assemblies
- 11 Using Design Accelerator
- 12 Setting Up Drawings
- 13 Creating Drawing Views
- 14 Annotating Drawings
- Annotation Tools
- Using Styles to Format Annotations
- Working with Tables
- Creating Dimensions In Drawings
- Controlling Dimension Styles
- Placing Center Marks and Centerlines
- Adding Notes and Leader Text
- Using Hole and Thread Notes
- Working with Title Blocks
- Working with Dimensions and Annotations
- Printing Drawing Sheets
- Plotting Multiple Sheets
- Tips for Annotating Drawings
- 15 Using Content Center
- 16 Autodesk Inventor Utilities
- Index
6 Position the view preview in the lower left corner of the sheet (in Zone
C6). Click the sheet to place the view.
7 Click the Projected View tool in the panel bar or from the Drawing Views
panel bar.
Click the base view and move the cursor vertically to a point above the
base view. Click the sheet in Zone E6 to place the top view.
8 Move the cursor horizontally to the right of the base view. Click the sheet
in Zone C3 to place the right-side view.
9 Move the cursor above the right-side view. Click the sheet in Zone E3 to
place the isometric view.
10 Right-click the sheet, and then select Create.
252 | Chapter 14 Annotating Drawings