2009
Table Of Contents
- Contents
- 1 Introducing Autodesk Inventor
- 2 Creating Sketches
- 3 Working with Sketched Features
- 4 Creating and Editing Placed Features
- 5 Creating and Editing Work Features
- 6 Using Projects to Organize Data
- 7 Managing Assemblies
- 8 Placing, Moving, and Constraining Components
- 9 Creating Assemblies
- 10 Analyzing Assemblies
- 11 Using Design Accelerator
- 12 Setting Up Drawings
- 13 Creating Drawing Views
- 14 Annotating Drawings
- Annotation Tools
- Using Styles to Format Annotations
- Working with Tables
- Creating Dimensions In Drawings
- Controlling Dimension Styles
- Placing Center Marks and Centerlines
- Adding Notes and Leader Text
- Using Hole and Thread Notes
- Working with Title Blocks
- Working with Dimensions and Annotations
- Printing Drawing Sheets
- Plotting Multiple Sheets
- Tips for Annotating Drawings
- 15 Using Content Center
- 16 Autodesk Inventor Utilities
- Index
4 Continue to revise the position of the work point. When finished, click
OK.
Modifying Work Features
Other than the grounded work point, all work features are associated to the
features or geometry used to create them. If you modify or delete the locating
geometry, the work feature changes accordingly. Conversely, any feature or
geometry that is dependent on a work feature for its definition is also affected
by changes to the work feature. Both scenarios are shown in the following
illustrations.
The work plane was created at a 45 degree angle to the top face.
The hole was created from a sketch on the work plane, making the hole
dependent on the work plane.
Modifying Work Features | 109