2009
Table Of Contents
- Contents
- Stress Analysis
- 1 Get Started With Stress Analysis
- 2 Analyze Models
- 3 View Results
- 4 Revise Models and Stress Analyses
- 5 Generate Reports
- 6 Manage Stress Analysis Files
- Simulation
- Index
2 Double-click the line near the 0.75 value to add another datum point.
The four datum points define three sectors. Each sector represents the
condition of the damping value. We will move the datum points to plot
changes in velocity to create variable damping.
3 Select the first sector.
4 Ensure the X1 and Y1 fields in the Starting Point section are set to 0.
5 In the X2 field of the Ending Point section, enter 0.5 s. It is the ending
time value for the selected sector.
6 Enter 70 N mm in the Y2 field. It is the peak load value for the selected
sector.
7 Select the second sector.
74 | Chapter 10 Simulation Tools