2009
Table Of Contents
- Contents
- Stress Analysis
- 1 Get Started With Stress Analysis
- 2 Analyze Models
- 3 View Results
- 4 Revise Models and Stress Analyses
- 5 Generate Reports
- 6 Manage Stress Analysis Files
- Simulation
- Index
2 Click the Force tool.
3 Select the vertex on the door.
4 Select the edge, for the force direction.
5 The direction indicator should point away from the tab stop on
the pillar. On the Force dialog box, click the Flip Direction button to flip
the vector.
6 Enter 10-N in the Magnitude field and click OK.
7 Return to isometric view.
8 Drag the door until it rests near or against the tab stop.
9 Run the simulation. The force overcomes the spring and holds the gate
open.
70 | Chapter 9 Construct Moving Assemblies