2009

The preview mesh is shown on the undeformed shaded view of your part.
Change the analysis type
1 On the Stress Analysis panel bar, click Stress Analysis Settings.
2 On the Settings dialog box, Analysis Type menu, select the new analysis
type.
If you choose Stress Analysis or Modal Analysis, only the results sets for
the selected analysis type are displayed in the browser. Any previously
obtained results sets are removed.
Change the element type for sheet metal
1 On the Stress Analysis panel bar, click Stress Analysis Settings.
2 On the Setting dialog box, select Standard Solid Model.
Updating Results of Stress Analysis
After you change any of the solution conditions, or if you edit the part
geometry, the current results are invalid. A lightning bolt symbol on the results
icons indicates the invalid status. The Stress Analysis Update item becomes
active on Standard toolbar.
Update stress analysis results
■ On the Standard toolbar, click Stress Analysis Update.
New results generate based on your revised solution conditions.
34 | Chapter 4 Revise Models and Stress Analyses