2009

When the force location is a single face, the direction is automatically
set to the normal of the face, with the force pointing to the outside of
the part.
4 To reverse the direction of the force, click the Flip Direction button.
5 Enter the magnitude of the force.
6 To specify the force components, click the More button to expand the
dialog box, and then select the check box for Use Components.
7 Enter either a numerical force value or an equation using defined
parameters. The default value is 100 in the unit system defined for the
part.
8 Click OK.
An arrow is displayed on the model indicating the direction and location
of the force.
You follow a similar procedure for each of the different load types.
18 | Chapter 2 Analyze Models