2010
Table Of Contents
- Contents
- Part 1 Tubes and Pipes
- 1 Get Started with Tube & Pipe
- 2 Route Basics
- 3 Set Styles
- 4 Create Rigid Routes and Runs
- Workflow for Rigid Routes
- Create Auto Route Regions
- Manually Create Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Create and Edit Flexible Hose Routes
- 6 Edit Rigid Routes and Runs
- 7 Use Content Center Libraries
- 8 Author and Publish
- 9 Document Routes and Runs
- Part 2 Cable and Harness
- 10 Get Started with Cable and Harness
- 11 Work With Harness Assemblies
- 12 Use the Cable and Harness Library
- 13 Work with Wires and Cables
- 14 Work with Segments
- 15 Route Wires and Cables
- 16 Work with Splices
- 17 Work with Ribbon Cables
- 18 Generate Reports
- 19 Work With Nailboards and Drawings
- Part 3 IDF Translator
- Index
Bend Radius Check 106
Bend, tube and pipe 32
Bill of Materials 199
Cable and Harness Library 235, 238
Change Fitting Diameter, tube and
pipe 114
Choose columns 201
Configure Libraries 152
Connect Fittings 113
Connect Fittings, tube and
pipe 141–142
Constraints, tube and pipe 34
Construction Line, tube and pipe 34
Content Center Editor 153
Content Center, tube and pipe 132
Convert sketch, tube and pipe 125
Copy Library Wire 242
Create Harness 228
Create Pipe Run 53
Create Pipe Run, tube and pipe 13
Custom Bend, tube and pipe 70
Delete Library Wire 243
Delete Route, tube and pipe 115
Delete Run, tube and pipe 115
Delete, tube and pipe 115
Design View Representations 185
Detail View 192
Display/Update Settings, tube and
pipe 115
Drive Dimension, tube and pipe 129
Edit Fitting Connections, tube and
pipe 115
Edit Fitting Orientation, tube and
pipe 115
Edit Library Wire 243
Edit Position 123
Edit Position, tube and pipe 115
Export Bills of Material 202
Export Wire Library 247
Fitting, tube and pipe 116
General Dimension 197
General Dimension, tube and
pipe 33
Group Settings 203
Hose Length, tube and pipe 104,
116
Import Wire Library 246
Include Geometry, tube and
pipe 34, 129
Insert Node, tube and pipe 102,
116, 120
Mode Node, tube and pipe 116
Move Segment 121
Move Segment, tube and pipe 116
New Library Wire 241
New Route, tube and pipe 31, 54
Parallel, tube and pipe 34
Parts Lists 202
Perpendicular, tube and pipe 34
Place Component 371
Place Fitting 131
Place from Content Center 98, 132
Point Snap, tube and pipe 65
Populate Route tool, tube and
pipe 96
Populate Route, tube and pipe 89
Projected View 190
publish part 176
Replace from Content Center 137
Report 330
Report Generator 330
Restore Fitting, tube and pipe 116
Rotation Snap, tube and pipe 82
Route 296
Route, tube and pipe 54, 116
Symbols 206
Tube & Pipe Authoring 155, 166
Tube & Pipe Styles 54
View Properties 200
translator, Intermediate Data Format
(IDF) 367
Tube & Pipe Authoring dialog box 158
Tube & Pipe Authoring tool 155, 166
Tube & Pipe Settings dialog box 16
Tube & Pipe Styles dialog box 39
Tube & Pipe Styles tool 54
tube and pipe 8
browser 6
context menus 114
environment 4
features 3
panel bar 13
384 | Index