2010
Table Of Contents
- Contents
- Part 1 Tubes and Pipes
- 1 Get Started with Tube & Pipe
- 2 Route Basics
- 3 Set Styles
- 4 Create Rigid Routes and Runs
- Workflow for Rigid Routes
- Create Auto Route Regions
- Manually Create Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Create and Edit Flexible Hose Routes
- 6 Edit Rigid Routes and Runs
- 7 Use Content Center Libraries
- 8 Author and Publish
- 9 Document Routes and Runs
- Part 2 Cable and Harness
- 10 Get Started with Cable and Harness
- 11 Work With Harness Assemblies
- 12 Use the Cable and Harness Library
- 13 Work with Wires and Cables
- 14 Work with Segments
- 15 Route Wires and Cables
- 16 Work with Splices
- 17 Work with Ribbon Cables
- 18 Generate Reports
- 19 Work With Nailboards and Drawings
- Part 3 IDF Translator
- Index
4 On the Drawing View dialog box, ensure that Enclosure_assembly.iam is
selected. The default location is:
Microsoft
®
Windows
®
XP operating system
■ Program Files\Autodesk\Inventor <version>\Tutorial Files\Cable & Harness
Windows Vista
®
operating system
■ Users\login-name\AppData\Local\Autodesk\Inventor <version>\Tutorial
Files\Cable & Harness
Click to place the view as shown.
5 In the browser, expand VIEW 1 and Enclosure_assembly.iam.
6 Right-click Harness_Assembly1, and then select Include Centerlines ➤
Wires.
The centerlines for both the wire and segment are displayed.
7 Right-click Harness_Assembly2, and then select Include Centerlines ➤
Cables.
362 | Chapter 19 Work With Nailboards and Drawings