2010
Table Of Contents
- Contents
- Part 1 Tubes and Pipes
- 1 Get Started with Tube & Pipe
- 2 Route Basics
- 3 Set Styles
- 4 Create Rigid Routes and Runs
- Workflow for Rigid Routes
- Create Auto Route Regions
- Manually Create Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Create and Edit Flexible Hose Routes
- 6 Edit Rigid Routes and Runs
- 7 Use Content Center Libraries
- 8 Author and Publish
- 9 Document Routes and Runs
- Part 2 Cable and Harness
- 10 Get Started with Cable and Harness
- 11 Work With Harness Assemblies
- 12 Use the Cable and Harness Library
- 13 Work with Wires and Cables
- 14 Work with Segments
- 15 Route Wires and Cables
- 16 Work with Splices
- 17 Work with Ribbon Cables
- 18 Generate Reports
- 19 Work With Nailboards and Drawings
- Part 3 IDF Translator
- Index
The first column lists the reference designator for the part, followed by
the part number.
Each column can be configured, and any property name can be displayed.
Column2Column1
PartNumberREFDESColumn header
NONENONELink type
PARTNUMBERREFDESName
1515Column width
NONECOUNTSubtotal function
YESYESProperty data?
DEFAULTNONEUnits
NONENONERound up
YESNOPrint units suffix?
YESYESPrint column?
10 On the Format tab, enter two as the first column to sort.
11 Select the following print options if they are not already selected:
Print filter information
Print header
Print information
Print column headers
12 Click OK to save the new configuration file.
Using the skills learned earlier, generate the report using this configuration
file to view the resulting output. Each of the parts in the design display
in an individual row.
340 | Chapter 18 Generate Reports