2010

6 Click the Table tab. Scroll to the right and notice how columns 5 - 10 use
link types to get the RefDes and pin name for each wire end.
7 Leave the Format settings as they are, and then click OK to display the
Save As dialog box. Name the file Modified_Wire Run List.cfg and then click
Save.
8 On the Report Generator toolbar, click Create Report.
9 On the Create Reports dialog box, click Add File to List, navigate to the
Modified_Wire Run List.cfg file in the Report Generator directory, and then
click Open.
10 Click OK.
Create Custom Reports
In this exercise, you create a new, custom report by first creating a
configuration file from a blank configuration file.
Create a custom report
1 Double-click Harness Assembly1, and then click Cable and Harness tab
➤ Manage panel ➤ Report.
2 Click the Edit a configuration (.cfg) file command on the Report Generator
toolbar.
3 Browse to the appropriate file location.
4 Enter the name of the new configuration file as custom_partbom.cfg and
click Open.
5 On the Info tab, enter Customized Part Bill of Material, no quantity.
6 Click the Filter tab, and then in Select Objects, select Part.
7 In Object Filters on the same tab, select All for both the Property Name
and Property Value.
8 Click the Table tab, and then click Insert Column to add two columns.
Insert each column before column 1.
9 Enter the values in the columns, as indicated previously. To enter data,
click in the input box, and then enter the value. If an arrow is displayed,
click the arrow and select from the list.
Create Custom Reports | 339