2010
Table Of Contents
- Contents
- Part 1 Tubes and Pipes
- 1 Get Started with Tube & Pipe
- 2 Route Basics
- 3 Set Styles
- 4 Create Rigid Routes and Runs
- Workflow for Rigid Routes
- Create Auto Route Regions
- Manually Create Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Create and Edit Flexible Hose Routes
- 6 Edit Rigid Routes and Runs
- 7 Use Content Center Libraries
- 8 Author and Publish
- 9 Document Routes and Runs
- Part 2 Cable and Harness
- 10 Get Started with Cable and Harness
- 11 Work With Harness Assemblies
- 12 Use the Cable and Harness Library
- 13 Work with Wires and Cables
- 14 Work with Segments
- 15 Route Wires and Cables
- 16 Work with Splices
- 17 Work with Ribbon Cables
- 18 Generate Reports
- 19 Work With Nailboards and Drawings
- Part 3 IDF Translator
- Index
Sets the text for column headings. Enter any string.Column header
Specifies whether to derive a property value from the
main object or an associated object. When set to a link
Link type
type, the property value is derived from an associated
object.
Sets the name of a single property whose value is
written to the report. You can enter a property such as
Name
Color Style or Gauge, or a keyword. Keywords enable
functions within the report generator. See the Help for
details on keywords.
Sets the width of the column.Column width
Sets the value to place in the last row.Subtotal function
Specifies whether the data displayed in this column is
a harness property. “No” means that the property is a
constant or special keyword.
Property data?
Specifies the units to use for that column. Autodesk
Inventor unit settings are used by default. When the
Units
data type is a length type, round-off values are
presented in the Round Off Row.
Indicates the round up value used for wire and segment
lengths. Values are dependent on the Unit setting.
NOTE We recommend that you do not adjust the Unit
and Round-up settings from the default. If adjusted, the
lengths in harness assembly and nailboard could be differ-
ent from the generated reports.
Round Up
Sets whether to print a units suffix in the report.Print units suffix?
Sets whether to print this column in the report.Print column?
Filter Tab
The Filter tab options determine the harness objects and property name value
pairs used to process data for the report.
Sets one or more harness component objects to include
in the report.
Select objects to re-
port
Sets the property name and value pairs to include or
exclude from the report. Also specifies the property
value used to group and calculate like objects.
Object filters
Edit Configuration Files | 335