2010
Table Of Contents
- Contents
- Part 1 Tubes and Pipes
- 1 Get Started with Tube & Pipe
- 2 Route Basics
- 3 Set Styles
- 4 Create Rigid Routes and Runs
- Workflow for Rigid Routes
- Create Auto Route Regions
- Manually Create Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Create and Edit Flexible Hose Routes
- 6 Edit Rigid Routes and Runs
- 7 Use Content Center Libraries
- 8 Author and Publish
- 9 Document Routes and Runs
- Part 2 Cable and Harness
- 10 Get Started with Cable and Harness
- 11 Work With Harness Assemblies
- 12 Use the Cable and Harness Library
- 13 Work with Wires and Cables
- 14 Work with Segments
- 15 Route Wires and Cables
- 16 Work with Splices
- 17 Work with Ribbon Cables
- 18 Generate Reports
- 19 Work With Nailboards and Drawings
- Part 3 IDF Translator
- Index
5 Click the Segments button, and then, in the graphics window, click the
segment between the two blue connectors (parts 360575:1 and 360575:2).
6 Click OK.
Both wires in the cable return to their unrouted state.
Unroute All Wires or Cables from All Segments
In this exercise, you unroute the remaining wires. If the dialog box is not still
open from the previous exercise, select the Unroute command.
Unroute all wires
1 Activate Harness Assembly1.
2 On the Unroute dialog box, verify that both the All Wires and All
Segments check boxes are selected.
3 Click OK.
The wires are unrouted and wire lengths update to reflect the change.
Practice Your Skills
Use the skills and tools learned in the previous examples:
1 Reroute the wires and cables you just unrouted.
2 Save your work.
The data files with routed wires and cables are required to create the
nailboard in
Work With Nailboards and Drawings on page 341.
Unroute All Wires or Cables from All Segments | 303