2010
Table Of Contents
- Contents
- Part 1 Tubes and Pipes
- 1 Get Started with Tube & Pipe
- 2 Route Basics
- 3 Set Styles
- 4 Create Rigid Routes and Runs
- Workflow for Rigid Routes
- Create Auto Route Regions
- Manually Create Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Create and Edit Flexible Hose Routes
- 6 Edit Rigid Routes and Runs
- 7 Use Content Center Libraries
- 8 Author and Publish
- 9 Document Routes and Runs
- Part 2 Cable and Harness
- 10 Get Started with Cable and Harness
- 11 Work With Harness Assemblies
- 12 Use the Cable and Harness Library
- 13 Work with Wires and Cables
- 14 Work with Segments
- 15 Route Wires and Cables
- 16 Work with Splices
- 17 Work with Ribbon Cables
- 18 Generate Reports
- 19 Work With Nailboards and Drawings
- Part 3 IDF Translator
- Index
Delete Wires
To remove a wire, select the wire to remove, and then delete it using the
context menu.
Delete a wire
1 Activate Harness Assembly1, if not already active.
2 In the browser or graphics window, select Wire2.
NOTE To select the wire in the graphics window, you may need to set the
Select tool to Select Sketch Features.
3 Right-click and select Delete from the context menu.
The wire is deleted.
Remove Cables and Cable Wires
There are several ways you can remove cables from your design. You can:
■ Delete an entire cable.
■ Disconnect a selected cable wire from its current connection.
■ Delete a selected cable wire from the cable definition.
Like wires, you can delete cables that are no longer used at any time. To delete
a cable, use the same workflow used for deleting wires.
To remove a cable wire from a cable, edit the cable definition in the Cable
and Harness Library and then delete the cable wire. Removing a cable wire
262 | Chapter 13 Work with Wires and Cables